|
Anchors
- We carry a full line of anchors to fasten clips or full backing plates to any surface.
| Nylon Nail-In Anchors (click on image for larger view) |
- Use Nylon Nail-In Anchors for light duty fastening in masonry, brick, block or concrete.
- The head of the nail is slotted so the anchor can be removed with a screwdriver.
- These anchors meet or exceed GSA Specifications FF-325, Group V, Type 2, Class.
|
|
Part # |
Image |
Anchor
Size |
Hole
Size |
Pull Out
Strength |
Shear
Strength |
Minimum
Quantity |
Bulk Pkg.
Qty. |
|
4630 |
|
3/16" x 1" |
3/16" |
250 lbs. |
530 lbs. |
100 |
2,000 |
|
4730 |
|
3/16" x 1 1/2" |
3/16" |
295 lbs. |
680 lbs. |
100 |
2,000 |
|
5630 |
|
1/4" x 1" |
1/4" |
235 lbs. |
790 lbs. |
100 |
2,000 |
|
5730 |
|
1/4" x 1 1/2" |
1/4" |
290 lbs. |
830 lbs. |
100 |
2,000 |
| |
| Sleeve Anchors (click on image for larger view) |
- Use Sleeve Anchors for heavy duty fastening in masonry, brick, block, or concrete.
- These anchors meet or exceed GS Specifications FF-S-325, Group II, Type 3, Class 3.
- A safe working load should not exceed 25% of stated values.
|
|
Part # |
Image |
Anchor
Size |
Hole
Size |
Pull Out
Strength |
Shear
Strength |
Minimum
Quantity |
Bulk Pkg.
Qty. |
|
1712 |
|
3/8" x 1 7/8" |
3/8" |
2700 lbs. |
2280 lbs. |
50 |
n/a |
|
1713 |
|
3/8" x 3" |
3/8" |
2700 lbs. |
2280 lbs. |
50 |
n/a |
| |
| Plastic Anchors (click on image for larger view) |
- Use Plastic Anchors for light duty fastening in masonry, brick, block, concrete or drywall
|
|
Part # |
Image |
Anchor Size |
Screw
Size |
Hole
Size |
Minimum
Quantity |
Bulk Pkg.
Qty. |
|
8450 |
|
3/16" x 7/8" |
8 |
3/16" |
100 |
2,000 |
|
8460 |
|
1/4" x 1" |
10 |
1/4" |
100 |
2,000 |
| |
| Hex Head Screws (click on image for larger view) |
|
Part # |
Image |
Screw Size |
|
Minimum
Quantity |
Bulk Pkg.
Qty. |
|
#8 HH |
|
#8 x 1" |
100 |
2,000/box |
|
#10 HH |
|
#10 x 1" |
100 |
2,000/box |
| |
| Wallgrabbers (click on image for larger view) |
- Use Wallgrabbers for light duty fastening in drywall and plaster.
- No drilling is required -- drive in with hammer and insert screw.
[Note: Screw ordered separately -- #8 hex head recommended]
|
|
Part # |
Image |
Anchor Size |
Screw
Size |
|
Minimum
Quantity |
Bulk Pkg.
Qty. |
|
WG #8 |
|
#8 |
#8 x 1" |
100 |
2,000/box |
| |
 Installation Hints
Back to Cableready's main Products Page
|
