|
Part # |
Description |
Image
(click on image for larger view) |
Use This Fitting When... |
|
HC1251 |
Sheet Metal
Shear |
|
...you want to cut Straight Line molding to desired length. |
|
HC1451 |
Super Snip
Shear |
STILL MISSING IMAGES |
...you want to cut specialty corners or notches in Straight Run molding and cut Straight Line molding to desired length, |
|
RS2531 |
Shear Handle Spring Replacement |
STILL MISSING IMAGES |
Note: Spring Replacement is the same for both HC1251 and HC1451.
|
|
RB2511 |
Shear Replacement Blade |
|
Note: Replacement blade is the same for both HC1251 and HC1451. |
|
CR-7 |
Anchor Driver |
|
...you want to drive nail-in anchors into the 1/2" clip.
|
|
EK050HD |
1/2" Entry Key |
|
...you want to re-enter 1/2" molding after the molding has been installed. |
|
EK100HD |
Entry Key |
|
...you want to re-enter 3/4", 1", and 2" molding
after the molding has been installed. |
