FLIH Series
Spec Sheet PDF	HIP-2F LI H 2-way splitter 5-1000 MHz Flat Port Low Intermod	HIP-3F LI H 3-way splitter 5-1000 MHz Flat Port Low Intermod	HIP-4F LI H 4-way splitter 5-1000 MHz Flat Port Low Intermod
To meet the stringent demands of return path, high-frequency data and highly corrosive environments, these splitters feature enhanced mechanical and electrical properties. The series incorporates input hum reduction circuitry, lacquered rear covers and hex/phillips/slot ground screws, plus high-quality solder-sealed covers for advance shielding.		33dB typical return loss and 35dB guaranteed port-to-port isolation between 15-40MHz Compliant with SCTE splitter guidelines Flat frequency response, minimal insertion loss Flat-end ports support flush connector-to-port contact, 75ohm Lacquered rear cover improves corrosion resistance Larger weather boot sealing ridge gives tight boot seal Operating temperature range, -40F to +140F Port protection caps protects precision threads from damage Round seizure pin for complete contact Smaller aperture port (.24) assures metal-metal contact between the inside of the connector and the port surface connector Zinc alley die-cast housing, tin-plated